Wamate Bolengu
Luanda
Profil professionnel
Technicien de maintenance qualifié, je suis capable de gérer les travaux d'entretien et de dépannage en autonomie. Doté d'un bon relationnel, ponctuel et efficace, j'apporte entière satisfaction à la clientèle.
Vue d'ensemble
20
20
years of professional experience
16
16
years of post-secondary education
1
1
Certification
Expérience
Senior Instrumentation Maintenance Technician
SBM
Luanda
06.2025 - Actuel
- Preventive maintenance of equipment and installations according to the schedule: adjustments, cleaning, lubrication, and parts replacement.
Handling of simple troubleshooting: identifying the malfunction and replacing defective components.
Preventive and corrective maintenance of technical production installations.
Diagnosis and resolution of breakdowns and technical problems to minimize downtime.
Diagnostic testing to identify the cause of the malfunction and the type of repair required.
Regular inspections and preventive maintenance to ensure the proper functioning of equipment.
Team Leader Instrumentation
SPIE Oil & Gas Services
01.2022 - 11.2025
- As a Forman, I perform all work tasks safely and responsibly, I am also the leader of a team of 4 to 5 Technicians to perform preventive and corrective maintenance activities for General Instrumentation systems and Fire and Gas; Flow, pressure, level, temperature, vibrations. Process and Control, On-Off Valves, Control Valves, and Safety Valves Reading of P&ID and Loop diagrams. Implementation of safety standards procedures (FGS, ESD, PSS, SSS, and HIPPS), PCV, POS, TCV, FCV, LCV, ROV, SDV, ESDV, BDV, HOCV, AT, ZSH, ZSL, FT, TT, LT, PT, GT, GTL, Piping wiring. PLC, DCS, (HART).
Team Leader Instrumentation
Cegelec Oil & Gas Services
luanda
01.2007 - 12.2021
- As a Forman, Specialized mobile equipment , troubleshooting, maintenance and quality control
- Electrical and PLC support to the Plant Team
- PLC code programming and troubleshooting
- Maintain electrical control systems in containers, trailers and skids
- Complete EHS training courses on an IT system and be involved in the EHS framework and work within its boundaries
- Complete testing of electrical circuits and panels, to ensure systems are safe and compliant with regulations
- To perform CE upgrades to existing equipment as per the requirement of the business
- Some PLC modifications and fault finding in the regeneration plant, for sites, and on our control systems for mobile water treatment equipment
- Fault find, repair and install pumps in different environments such as chemical and water
- Provide cover and support over evenings and weekends if required to do so
- I am also the leader of a team of 4 to 5 Technicians to perform preventive and corrective maintenance activities for General Instrumentation systems and Fire and Gas; Flow, pressure, level, temperature, vibrations. Process and Control, On-Off Valves, Control Valves and Safety Valves Reading of P&ID and Loop diagrams. Implementation of safety standards procedures (FGS, ESD, PSS, SSS and HIPPS), PCV, POS, TCV, FCV, LCV, ROV, SDV, ESDV, BDV, HOCV, AT, ZSH, ZSL, FT, TT, LT, PT , GT, GTL, Piping wiring. PLC, DCS, (HART).
Senior Technician in Instrumentation and Field Control
CEGELEC
01.2007 - 12.2013
- Senior technician in instrumentation and field control
- Calibrate and maintain mechanical, pneumatic, chemical, electrical and electronic process controls and measurement instrumentation to approved procedures
- Understanding, evaluating, and executing the tests and procedures properly and investigating the Maintaining and setting up documentation and control procedures
- Safely and efficiently execute daily tasks related to calibration and instrumentation activities
- Generate Instrument Deviation Reports (IDR) for out of tolerance calibrations of process instrumentation and promptly notify the department facilitator and site instrument officer
- Maintain laboratory standards, equipment and supplies
- Develop and maintain calibration 'Standard Service Procedures' (SSP) documents and database
- Developing and improving maintenance procedures
- Installing, maintaining, repairing, overhauling, calibrating and testing a wide variety of industrial instrumentation such as control valves, transmitters, radars, levels, Controlling and regulating level, flow, pressure and temperature meters
- Executing preventative maintenance inspections on all instrumentation equipment
- Interpret, evaluate and document calibration test results
- Test, monitoring, and test equipment for control systems (FGS, ESD, PSS, SSS, and HIPPS)
- PCV, PDV, TCV, FCV, LCV, ROV, SDV, ESDV, BDV, HOCV, AT, ZSH, ZSL, FT, TT, LT, PT, GT, GTL, NSD, piping, wiring. PLC, DCS, (HART). Ability to interpret electrical and process drawings and instrumentation (P&ID)
Instrumentation and Control Technician
Stapem Offshore
01.2006 - 12.2007
- Gas turbine instrumentation and control systems provide advanced monitoring and diagnostics designed to prevent damage to the unit and to enable it to operate
- Preventive maintenance of all instruments. Troubleshooting, calibration, and testing of Process Protection Systems (PSS) Logic interlock and protection system, verification of ESD systems, configuration and adjustment of loop in DCS, also involved in many major and minor shutdown activities.
Electromechanical Maintenance Technician
PLASTICA Angola
01.2006 - 12.2007
- Read blueprints and schematics; verified dimensions of parts using precision measured instruments, operated metalworking machines, repaired and calibrated hydraulic and pneumatic assemblies, tested performance of electromechanical assemblies, installed electronic parts programming new robots, inspected parts for surface defects; and maintained electromechanical equipment.
Technical Maintenance Engineer
University Internship
01.2006 - 12.2007
- PLC troubleshooting techniques to advanced problem-solving
- Performed work requiring a thorough knowledge of instrument application, operation, and the electrical and mechanical principles involved in repair, testing, and calibration.
- Continuous improvement is an endless cyclical process, highlighting the importance of a proactive problem-solving and process optimization approach.(e.g., packaging, tools, processes, equipment, and products) including managing the change control process, to meet the project's specific objectives (e.g., improve quality, deliver new products, and optimize processes)
Formation
Diploma - Electromechanical Engineering
Higher Institute of Applied Techniques ISTA
Kinshasa, DRC 01.1998 - 01.2003
High school - Biochemistry
Kinshasa, DRC 01.1987 - 01.1998
Compétences
- Oral communication
- Written communication
- Self-motivation
- Team-oriented work practices
- Data analysis
- Technical problem-solving
- Analytical skills
- Problem-solving skills
- Communication skills
- Interpersonal skills
- PC skills
- MS Office
- Task management
- Prioritization
- Reading PI&D drawings
- Designing PI&D drawings
- Loop/wiring schematics
Personnalisé
Wamate Bolengu, 001916664ZE034, N2401030, 2028-12-03, 1973-08-18, florent.wamate@gmail.com, +244924396180, Golf 2, Luanda, Angola, Portuguese, Native, French, Fluently, English, Beginning, Angolan, Angola, Instrumentation & Controls Qualifications Team Leader, Instrumentation & controls provide technical leadership and support to Plant Operational and Maintenance staff in troubleshooting, root cause analysis, problem resolution, and optimization of existing electrical controls, instrumentation, networking, power systems, PLC, HMI, servo, controls networking systems, control safety systems, NFPA 70E, industrial computer systems, motor control, distributed control systems, and other automation., SPIE Oil & Gas Services, Team Leader Instrumentation, 2022-01-01, offshore- Block 17, FPSO GIRASSOL, Angola, Total Energies, Angola, As a Forman, I perform all work tasks safely and responsibly, I am also the leader of a team of 4 to 5 Technicians to perform preventive and corrective maintenance activities for General Instrumentation systems and Fire and Gas; Flow, pressure, level, temperature, vibrations. Process and Control, On-Off Valves, Control Valves, and Safety Valves Reading of P&ID and Loop diagrams. Implementation of safety standards procedures (FGS, ESD, PSS, SSS, and HIPPS), PCV, POS, TCV, FCV, LCV, ROV, SDV, ESDV, BDV, HOCV, AT, ZSH, ZSL, FT, TT, LT, PT, GT, GTL, Piping wiring. PLC, DCS, (HART)., Cegelec Oil & Gas Services, Team Leader Instrumentation, 2013-01-01, 2021-12-31, Offshore- FPSO Girassol Block 17, Angola, TOTAL ENERGIES ANGOLA, Angola, As a Forman, Specialized mobile equipment (RO, SWRO, SRO, MPak, ) turn-around, troubleshooting, maintenance and quality control. Electrical and PLC support to the Plant Team. PLC code programming and troubleshooting. Maintain electrical control systems in containers, trailers and skids. Complete EHS training courses on an IT system and be involved in the EHS framework and work within its boundaries. Complete testing of electrical circuits and panels, to ensure systems are safe and compliant with regulations. To perform CE upgrades to existing equipment as per the requirement of the business. Some PLC modifications and fault finding in the regeneration plant, for sites, and on our control systems for mobile water treatment equipment. Fault find, repair and install pumps in different environments such as chemical and water. Provide cover and support over evenings and weekends if required to do so, I am also the leader of a team of 4 to 5 Technicians to perform preventive and corrective maintenance activities for General Instrumentation systems and Fire and Gas; Flow, pressure, level, temperature, vibrations. Process and Control, On-Off Valves, Control Valves and Safety Valves Reading of P&ID and Loop diagrams. Implementation of safety standards procedures (FGS, ESD, PSS, SSS and HIPPS), PCV, POS, TCV, FCV, LCV, ROV, SDV, ESDV, BDV, HOCV, AT, ZSH, ZSL, FT, TT, LT, PT , GT, GTL, Piping wiring. PLC, DCS, (HART)., CEGELEC, Senior Technician in Instrumentation and Field Control, 2007-01-01, 2013-12-31, Offshore- FPSO Girassol Block 17, Angola, Angola, Senior technician in instrumentation and field control. Calibrate and maintain mechanical, pneumatic, chemical, electrical and electronic process controls and measurement instrumentation to approved procedures. Understanding, evaluating, and executing the tests and procedures properly and investigating the Maintaining and setting up documentation and control procedures. Safely and efficiently execute daily tasks related to calibration and instrumentation activities. Generate Instrument Deviation Reports (IDR) for out of tolerance calibrations of process instrumentation and promptly notify the department facilitator and site instrument officer. Maintain laboratory standards, equipment and supplies. Develop and maintain calibration 'Standard Service Procedures' (SSP) documents and database. Developing and improving maintenance procedures. Installing, maintaining, repairing, overhauling, calibrating and testing a wide variety of industrial instrumentation such as control valves, transmitters, radars, levels, Controlling and regulating level, flow, pressure and temperature meters. Executing preventative maintenance inspections on all instrumentation equipment. Interpret, evaluate and document calibration test results. Test, monitoring, and test equipment for control systems (FGS, ESD, PSS, SSS, and HIPPS) PCV, PDV, TCV, FCV, LCV, ROV, SDV, ESDV, BDV, HOCV, AT, ZSH, ZSL, FT, TT, LT, PT, GT, GTL, NSD, piping, wiring. PLC, DCS, (HART). Ability to interpret electrical and process drawings and instrumentation (P&ID)., Stapem Offshore, Instrumentation and Control Technician, 2006-01-01, 2007-12-31, Offshore- Block 3, Angola, Sonangol, Angola, Gas turbine instrumentation and control systems provide advanced monitoring and diagnostics designed to prevent damage to the unit and to enable it to operate. Preventive maintenance of all instruments. Troubleshooting, calibration, and testing of Process Protection Systems (PSS) Logic interlock and protection system, verification of ESD systems, configuration and adjustment of loop in DCS, also involved in many major and minor shutdown activities., PLASTICA Angola, Electromechanical Maintenance Technician, 2006-01-01, 2007-12-31, Offshore- Block 3, Angola, Sonangol, Angola, Read blueprints and schematics; verified dimensions of parts using precision measured instruments, operated metalworking machines, repaired and calibrated hydraulic and pneumatic assemblies, tested performance of electromechanical assemblies, installed electronic parts programming new robots, inspected parts for surface defects; and maintained electromechanical equipment., University Internship, Technical Maintenance Engineer, 2006-01-01, 2007-12-31, Offshore- Block 3, Angola, Sonangol, Angola, PLC troubleshooting techniques to advanced problem-solving. Performed work requiring a thorough knowledge of instrument application, operation, and the electrical and mechanical principles involved in repair, testing, and calibration. Continuous improvement is an endless cyclical process, highlighting the importance of a proactive problem-solving and process optimization approach (e.g., packaging, tools, processes, equipment, and products) including managing the change control process, to meet the project's specific objectives (e.g., improve quality, deliver new products, and optimize processes)., Diploma in Electromechanical Engineering, Higher Institute of Applied Techniques ISTA DRC Kinshasa, 1998-01-01, 2003-12-31, High School, Biochemistry, DRC Kinshasa, 1987-01-01, 1998-12-31, ATEX 2 regulations, FRANCE (st Denis), 2021, BST training and Survival Helicopter Accident Safety Training, ESSA ANGOLA, 2024, COXSWAIN, BIM maritime training center in Ponta Negra, 2021, Bently Nevada 3500 System Vibration Training (Operation and Maintenance and System), FRANCE(NANTE), 2019, Instrumentation and Regulation, IRA Center (Institut de Régulation et d'Automatisme) France arla, 2017, AUTOCHIM training(fire and gas), ANGOLA(cegelec), 2010, AUTOCHIM training(fire and gas), FRANCE(St Denis), 2010, Training Instrumentation Process and Regulation2, Centre Cegelec CATEX France/Luanda, 2009, Process and Regulation Instrumentation Training1, Cegelec Center CATEX France/Luanda, 2008, Industrial measurement instrumentation training, Cegelec Center CATEX France/Luanda, 2008, Training in instrumentation, Good Shepherd Center Luanda, 2005, SAP training: (Systems, applications and products in data processing), TOTAL, 2008, Wiring 220 VAC, 480 VAC, single phase and three phase, Training in hydraulic transmission at the INPP plant, 2004, Office package (Word, Excel, PowerPoint) and Internet, 2010, Familiarity with voltage controls to include, 24VDC, 110VAC, 2008, Excellent oral and written communication skills, self-motivation, team-oriented work practices, and strong data analysis & technical problem-solving skills, Strong analytical and problem-solving skills – ability to focus on important information without getting bogged down in unnecessary details, Display strong communication and interpersonal skills and have the ability to work in a fast-paced consulting environment with multiple deadlines, Strong PC skills including MS-office, Demonstrated ability to work on multiple tasks, setting and communicating priorities, Experience reading and designing PI&D drawings and loop/wiring schematics required, I hereby declare that all the above statements are true and correct according to my knowledge.
Langues
Anglais
Débutant
Certificats
- Certification d'officier de protection (CPO)
Chronologie
Senior Instrumentation Maintenance Technician
SBM
06.2025 - Actuel
Team Leader Instrumentation
SPIE Oil & Gas Services
01.2022 - 11.2025
Team Leader Instrumentation
Cegelec Oil & Gas Services
01.2007 - 12.2021
Senior Technician in Instrumentation and Field Control
CEGELEC
01.2007 - 12.2013
Instrumentation and Control Technician
Stapem Offshore
01.2006 - 12.2007
Electromechanical Maintenance Technician
PLASTICA Angola
01.2006 - 12.2007
Technical Maintenance Engineer
University Internship
01.2006 - 12.2007
Diploma - Electromechanical Engineering
Higher Institute of Applied Techniques ISTA
01.1998 - 01.2003
High school - Biochemistry
01.1987 - 01.1998